How to make a rod for clawfoot tub shower curtain
Clawfoot tub shower curtain – Clawfoot bathtubs are beautiful pieces of bathroom equipment, but its shape and its independence from the bathroom wall creates difficulties when it comes to a shower curtain. Unlike a combination shower / tub built conventionally, requiring only a shade straight clawfoot tub shower curtain have to go all the way around the tub to prevent water from penetrating the walls and floor. For this, a curtain barrel extending all needs the way around the tub.
Do it the easy way
- Purchase four pieces of metal pipe or rod, two are approximately equal to the length of your tub and two legs that are approximately equal to its width.
- Connect these four pieces of metal in the corners using wire or hose clamps to make a rectangle which is approximately a similar size and shape when your bathtub.
- Suspends the ceiling box installed above the bathtub eye bolts in the ceiling joists and extending wires of eye bolts for building your rod.
- Hang the rod clawfoot tub shower curtain you’ve made. Because the curtain does not slide beyond the wires that hold the rod, beam or curtain purchase a separate space for each section between the cable suspensions.
Do it the hard way
- Purchase two sections of 10 feet (3.05 m) of metal pipe 3/4 inch (1.90 cm).
- Place the two pieces together to create the same way as your bathtub. Move them closer or farther up the way they do is the same size as the tub. Cut the two protruding ends of each piece so that they can be joined together. Connect the two pieces with two tube connectors, creating a solid oval.
- Hang the oval shape of the roof in a similar manner described for the strategy in Section 1.
- Hang the clawfoot tub shower curtain for your new rod.